Vestil Galvanized heavy-duty Self-Dumping Hoppers With Bumper Release - 6,000 LB, D Series automatically dump when the bumper release contacts the side of a dumpster or other solid surface. Hoppers may also be dumped manually using a pull cable operated from the seat of the forklift. Hoppers automatically return to an upright and locked position after dumping. A safety restraint is provided to secure the hopper to the forklift. These galvanized forklift dump hoppers aid in complying with OSHA 29 CFR 1910.178(m)(5)(iii) since the fork lift operator stays at the forklift controls when dumping. Models D-25, D-33, D-50, D-75, and D-100 can be stacked if the top forklift hopper is turned 90 degrees from the bottom hopper. Heavy-duty 8-gauge Galvanized Steel construction.
Vestil Galvanized Self-Dumping Hoppers with Bumper Release are built to order and have an estimated lead time to leave the warehouse of 10 to 12 weeks.
Specifications:
- 6,000 LB Uniform Capacity
- Automatically dumps when the bumper release makes contact with a solid surface
- May also be manually dumped from seat of the forklift via a pull cable
- Automatically returns to the upright position after dumping
- Usable fork pockets measure 7½" W x 2½"H
- Models D-33, D-50, D-75 and D-100 are stackable - top hopper must be rotated 90° from the bottom hopper
- Made of 8 gauge galvanized steel
Optional Casters (see options below)
When casters are ordered with hopper, quick-install caster pads are factory-welded to the base of the hopper.
The weight of the hopper must be subtracted from the rated caster capacity to calculate usable caster capacity.
When using casters, the maximum hopper capacity is the lower of the hopper capacity or the caster capacity.
Optional Heavy-Duty Poly Hopper Lids:
Keep the contents of hoppers out of sight for a cleaner appearance with our hopper lids. Click on link or photo below to view selections & order.
Other Options (see options below)
- Welded Leak Proof Option: Model LEKP
- Welded Leak Proof Option With 2" Threaded Drain Plug (located in left corner): Model D-DPLG-2
- (4) welded lifting lugs (one on each corner): Model LUG
- High visibilty yellow extensions add 15-1/16" of steel mesh to the top of sides and back of hopper. Available for D-150, D-200, D-250 & D-300 models.
