The Morse 400S-XR manual drum tipper allows a single operator to lift and pour a full drum weighing 600 LBS or a half full drum weighing 300 LBS. The operator controls the pour angle of up to 360 degrees in either direction and the pour height of up to 71”. A hand pump raises the drum, and a pull chain controls tilting 360° in either direction. This manual barrel dumper includes safety covered gears for operator protection and has durable stress-relief weld joints for years of service. Drum dumper features a drum cradle that automatically cinches 22" to 23.5" diameter drums. The cinch chain includes a flexible chain cover to aid in protecting the sidewall of the drum. The Morse 400S-XR manual drum lifter has extended reach, allowing it to pour a drum beyond its front wheels. This drum dumper is designed to pour a drum with a drum faucet or drum cone in place.
Please contact HOF for an estimated lead time for the Morse 400S-XR manual drum tilter.
Specifications:
- Max. dump height: 71"
- For use with 22" to 23.5" diameter 55 gal. steel drums (adaptors available for small diameter, plastic, & fiber drums)
- 360° manual tilt in both directions
- Hand pump controls lift
- Full Drum Capacity: 600 LBS
- Half Full Drum Capacity: 300 LBS. A partially full drum is an unbalanced and shifting load which reduces capacity.
- Cinch chain includes flexible chain cover for drum sidewall protection
- All welded steel construction and high quality components for years of dependable service
Options:
- Top rim clamp assembly to handle 30-55 gallon rimmed plastic, fiber, or steel drum. Bolts on to MORCINCH drum holder to prevent drum from slipping through - Model 4560B-P
- Bracket assembly to handle rimless plastic drums that are 31"-39" tall. Also can be used with fiber or steel drums (or any rimmed drum) for a more secure grip. Bracket at top and bottom prevents drum from slipping through.Requires lifting or tilting drum to get drum onto bottom foot - Model 4556-P
- Drum adaptors with integrated hold-down brackets to handle 14" dia. to 20.5" dia. drums - Models 55/30-14.5, 55/30-16, 55/30-17.5, 55/30-19, 55/30-20.5
- Web Strap & Ratchet replaces cinch chain. Factory Installed - Model 5115i-P
- 3-piece Drum Holder for 22.5" diameter, 55-gallon drums replaces cinch chain. Factory Installed - Model G-400
