The Morse 85-5 Pail Dumper is a below-hook pail handler which can be used with an overhead lifting device to lift, tilt and pour from 5-gallon metal or plastic pails, measuring 11" to 12" in diameter. Load capacity is 200 LBS for a full pail, and 100 LBS for a half-full pail. Pail is clamped into holder of the pail dumper, with a top bracket to keep the pail in place even when inverted. A manual hand wheel turns the pail for dispensing, and can be turned end-over-end 360° in either direction. This pail dumper can be locked in the vertical or horizontal position. The Morse 85-5 overhead pail lifter is constructed of all welded steel. Load tested at the factory at 125% of rated capacity to comply with ANSI/ASME B30.20.
Specifications:
- For use with 5-gallon steel or plastic pails measuring 11" to 12" in diameter
- Full pail capacity: 200 LBS
- Half full pail capacity: 100 LBS
- Hand wheel tilts 360° to dispense
- Can be locked in vertical or horizontal position
- Load tested to 125% of rated capacity
- Comes with Load Test Certificate
- Weight: 25 LBS
- All steel welded construction in accordance with ANSI/AWS D14.1 and ASME BTH-1 for years of dependable service
