The current lead time for most products is longer than what is listed. Please check with us for the most current lead time.

Shopping Cart

0 Items

Morse 400A-72 Manual Drum Dumper

Morse 400A-72 Manual Drum Dumper
Plastic & Fiber Drum Adaptors 4556-P & 4560B-P
Standard drum cinch close up
Small Diameter Drum Adaptors Bracketed & Non-Bracketed
Option G400 3 piece Drum Holder
Options for Morse 400A-72 Barrel Dumper
Click to see More Photos
Back to List
SKU: 400A-72


Scroll Down for More Info

The Morse 400A-72 drum tipper allows a single operator to lift and pour a full drum weighing 800 LBS or a half full drum weighing 500 LBS. A chain wheel controls the pour angle of up to 360 degrees in either direction, while a hand pump lifts drums up to 72”. This barrel dumper includes safety covered gears for operator protection and has durable stress-relief weld joints for years of service. This Morse drum dumper features a drum cradle that automatically cinches 22" to 23.5" diameter drums. The cinch chain includes a flexible chain cover to aid in protecting the sidewall of the drum. The Morse 400A-72 drum dumper is designed to pour a drum with a drum faucet or drum cone in place. Spark Resistant model 400AM-72 available; contact HOF for a quote.


The Morse 400A-72 drum tilter is built to order with an estimated lead time to leave the warehouse of 5-10 business days.





  • Hand pump; max. dump height: 72"
  • For use with 22" to 23.5" diameter 55 gal. steel drums (adaptors available for small diameter, plastic, & fiber drums)
  • Chain wheel controls 360° tilt in both directions
  • Full Drum Capacity: 800 LBS
  • Half Full Drum Capacity: 500 LBS. A partially full drum is an unbalanced and shifting load which reduces capacity.
  • Cinch chain includes flexible chain cover for drum sidewall protection
  • All welded steel construction and high quality components for years of dependable service



  • Top rim clamp assembly to handle 30-55 gallon rimmed plastic, fiber, or steel drum. Bolts on to MORCINCH drum holder to prevent drum from slipping through - Model 4560B-P
  • Bracket assembly to handle rimless plastic drums that are 31"-39" tall. Also can be used with fiber or steel drums (or any rimmed drum) for a more secure grip. Bracket at top and bottom prevents drum from slipping through. Requires lifting or tilting drum to get drum onto bottom foot - Model 4556-P
  • Drum adaptors with integrated hold-down brackets to handle 14" dia. to 19" dia. drums - Models 55/30-14.5, 55/30-16, 55/30-17.5, 55/30-19
  • Hand Crank or Hand Wheel with Speed Knob replaces pull chain tilt control. Factory Installed - Models X02-400-72 & X03-400-72
  • Tilt Brake To Hold Tilt Angle of Drum - Factory Installed. Automatically locks drum in tilted position as operator tilts drum (prevents drum from rotating backward if operator lets go of chain) - Model 3900i-P
  • Web Strap & Ratchet replaces cinch chain. Factory Installed - Model 5115i-P
  • 3-piece Drum Holder for 22.5" diameter, 55-gallon drums replaces cinch chain. Factory Installed - Model G-400




Need a Drum Cone, Drum Faucet, or Drum Pump?
Click on the links below to view selection.

Drum Cones,  Drum Faucets,  Drum Pumps

Morse 400A-72 Manual Drum Tilter:
SKUCapacity/Desc.Capacity FullCapacity 1/2 FullWeightPriceQty
400A-72Manual Drum Dumper for 22" to 23.5" dia. Drums800 LBS500 LBS311 LBS $2,787.00
Options (may increase lead time):
4560B-PTop Rim Clamp for 30-55 Gal. Rimmed Plastic & Fiber Drums14 LBS $251.00
4556-PBracket Adaptor for 55 Gal. Rimless Plastic & Fiber Drums That Are 31"-39" Tall20 LBS $200.00
55/30-17.5Bracketed Adaptor for 17.0" to 17.5" Dia. Drum35 LBS $266.00
55/30-19Non-Bracketed Adaptor for 18.5" to 19" Dia. Drum (for handling a typical 30 gal. drum) 24 LBS $168.00
55/30-16Bracketed Adaptor for 15.5" to 16" Dia. Drum35 LBS $266.00
55/30-14.5Bracketed Adaptor for 14" to 14.5" Dia. Drum36 LBS $268.00
X02-400-72Hand Crank Replaces Pull Chain Tilt Control - Factory Installed2 LBS $123.00
X03-400-72Hand Wheel With Speed Knob Replaces Pull Chain Tilt Control - Factory Installed3 LBS $206.00
3900i-PTilt Brake To Hold Tilt Angle of Drum - Factory Installed3 LBS $201.00
5115i-PWeb Strap & Ratchet Replaces Cinch Chain - Factory Installed2 LBS $49.00
G-4003-Piece Drum Holder Replaces Cinch Chain - Factory Installed5 LBS $318.00

Customer Reviews

There are no customer reviews for this product. However, you can be the first person to add a review for this product.