The Elephant FA-2 electric chain hoist is a Japanese made, superior quality industrial hoist with an H3 duty rating, 2 Ton capacity, and 10’, 15’ or 20’ of lift (custom lift heights also available). IP65 / NEMA 4 24v 2 button hand pendant control hangs approximately 2’ lower than rated lift height. Single speed 230v/460v 3 phase motor is insulated for heat resistance and damage mitigation. A powder coated steel housing protects the hoist motor. Simple plug in type wiring makes attaching the hand pendant control and the power cord quick and easy. A limit switch stops hoist to prevent over-lifting or over-lowering. In the case of power loss, an electro-magnetic DC brake will engage to hold the load in place. Fixed top hook and 360° swiveling bottom hook that will slowly expand to indicate capacity overload. The Elephant FA-2 electric chain hoist is manufactured to meet ASME B30.16, and is load tested to 125% of the rated capacity. Load test certificate included with hoist.
Specifications:
- Made in Japan of the highest quality parts
- H3 motor duty rating, see duty rating descriptions in ADDITIONAL INFO above ↑
- Capacity: 2 Tons (4,000 LBS)
- Lift Heights: 10’, 15’ or 20’ (custom heights available – contact HOF)
- Headroom: 29.33”
- One speed motor operating at 230v/460v 3PH (can be either voltage) is insulated for heat resistance
- Lift Speed 12.5 FPM
- IP65 / NEMA 4 24v hand pendant control (hangs approx. 2’ lower than the hoist’s lift height)
- Hoist equipped with 16'4" power cord length (longer cord lengths available – contact HOF)
- Bottom hook with bearing swivels 360° / Fixed top hook
- Hardened galvanized steel chain with chain bucket
- Limit switch stops hoist operation from becoming over-lifted or over-lowered
- Electro-magnetic DC brake with 3X safety factor holds the load in place if power is lost
- Designed to connect to Elephant MAS series motorized electric trolley
- Indoor and Outdoor use (but should be protected from direct rain or snow)
- Meets ASME B30.16 / load tested to 125% of the rated capacity (test certificate included)
- Meets European Conformity Directive 89/392/EEC Annex II A
- JIS / ISO M4, FEM 1AM, ASME H3, IP54 rated
Options:
- Longer load chain - Contact HOF for pricing
- Longer PB control cord - Contact HOF for pricing