The Elephant DA-5 electric chain hoist is a Japanese made, superior quality industrial hoist with an H3 duty rating, 5 Ton capacity, and 10’, 15’ or 20’ of lift (custom lift heights also available). IP65 / NEMA 4 24v 2 button hand pendant control hangs approximately 2’ lower than rated lift height. Single speed 230v or 460v 3 phase motor is insulated for heat resistance and damage mitigation, and is designed for continuous operation for long periods of time with frequent starts within an hour cycle. Solid steel sides and a sealed body provide quiet operation and protection from dust. The motor frame is constructed with high quality aluminum cooling fins, which help keep the temperature down inside the motor. Simple plug in type wiring makes attaching the hand pendant control and the power cord quick and easy. A double-action limit switch stops hoist to prevent over-lifting or over-lowering. In the case of power loss, a double brake system made up of a mechanical brake and an electro-magnetic DC brake will engage to hold the load in place. The Elephant DA-5 electric chain hoist features a fixed top hook and 360° swiveling bottom hook with safety latch that will slowly open to indicate capacity overload. Electric hoist manufactured to meet ASME B30.16, and load tested to 125% of the rated capacity.
Specifications:
- Made in Japan of the highest quality parts
- H3 motor duty rating, see duty rating descriptions in ADDITIONAL INFO above ↑
- Capacity: 5 Tons (10,000 LBS)
- Lift Heights: 10’, 15’ or 20’ (custom heights available – contact HOF)
- Headroom: 40.5”
- One speed 230v or 460v 3 PH motor is insulated for heat resistance
- Lift Speed 11 FPM
- IP65 / NEMA 4 24v hand pendant control (hangs approx. 2’ lower than the hoist’s lift height)
- Features emergency stop button on pendant control
- Hoist equipped with 16'4" power cord length (longer cord lengths available – contact HOF)
- Bottom hook with bearing swivels 360° / Fixed top hook
- Hardened galvanized steel chain with chain bucket
- Double-action limit switch stops hoist operation from becoming over-lifted or over-lowered
- Double brake system: mechanical brake and electro-magnetic DC brake hold the load in place if power is lost
- Indoor and Outdoor use (but should be protected from direct rain or snow)
- Designed to connect to Elephant MAS series motorized electric trolley
- Meets ASME B30.16 / load tested to 125% of the rated capacity
- JIS / ISO M5, FEM 2M, ASME H3, IP54 rated
- Shown in photo with optional MAS motorized trolley
Options:
- Longer load chain - Contact HOF for pricing
- Longer PB control cord - Contact HOF for pricing
