The GNT GFC13 Walk Behind Floor Scrubber is a compact, lithium-powered cleaning machine built for warehouses, retail stores, commercial buildings, and other facilities with concrete, epoxy, tile, or sealed floors. Two 8.3" rotating scrub brushes spin at 350 rpm, powered by a 200W brush motor, to loosen dirt and grime across a 16.9" cleaning path. A 150W suction motor with a 17.7" suction width picks up the dirty water as you go. With a cleaning rate of 8,600 to 10,700 sq. ft. per hour and a travel speed of up to 3.1 mph, the scrubber covers ground quickly. A controlled water and detergent system delivers consistent results while reducing waste, using a 1.1 gallon clean water tank and a 1.7 gallon recovery tank. Power comes from a 36V 10.5Ah lithium battery that recharges in about 3 hours. Weighing just 43 lbs with a folding frame, the GNT GFC13 Walk Behind Floor Scrubber is easy to transport, store, and steer through aisles and corners. Its simple controls keep operator training time to a minimum.
The GNT GFC13 Walk Behind Floor Scrubber has an estimated lead time to leave the warehouse of 3 to 5 business days.
Specifications:
- Cleaning Width: 16.9" (430 mm)
- Suction Width: 17.7" (450 mm)
- Work Efficiency: 8,600 to 10,700 sq. ft. per hour (800 to 1,000 m²/h)
- Scrub Brushes: Dual 8.3" (212 mm) rotating brushes
- Brush Speed: 350 rpm
- Brush Motor: 36V 200W
- Suction Motor: 36V 150W
- Vacuum: 15 kPa
- Clean Water Tank: 1.1 gallons (4 L)
- Recovery Tank: 1.7 gallons (6.5 L)
- Battery: 36V 10.5Ah lithium
- Charging Time: 3 hours
- Travel Speed: Up to 3.1 mph (5 km/h)
- Turning Radius: 16.9" (430 mm)
- Folding frame for easy transport and storage
- Ergonomic handle with simple operator controls
- Durable industrial housing
- Overall Dimensions: 11.8" L x 16.9" W x 41.3" H (300 x 430 x 1050 mm)
- Net Weight: 43 lbs (19.5 kg)
