Morse Pail Heaters are ideal for heating the contents of 5-gallon plastic or metal pails. Each heater is 4" wide and made of fiberglass-reinforced silicone rubber. Pail heaters are attached using a spring and hook, and feature a thermostat which sets the temperature between 50° and 425°F for metal pails, or between 5° and 160°F for plastic pails. Heaters must be positioned below the level of liquid in the pail to avoid damaging the heater. Models ending with -115 run on 115V volt power and have a 6' cord and plug, while models ending with -230 run on 230V power and have a 6' cord without a plug. Morse Pail Heaters must not be used for pails containing flammable materials or in explosion hazard areas.
Morse Pail Heaters have an estimated lead time to leave the warehouse of 10 to 15 business days.
Specifications:
- Heats the contents of 5-gallon plastic or metal pails (see below)
- 115V or 230V heater available
- Thermostat set-point adjusts from 50 to 425ºF
- Heater width: 4"
- Watts: 150, or 500 (depending on model)
- Made of fiberglass-reinforced silicone rubber
