Morse 710 Metal Drum Heaters are ideal for heating the contents of 55, 30 or 15-gallon metal drums. Each heater is 4" wide and made of fiberglass-reinforced silicone rubber. Drum heaters are attached using a spring and hook, and feature a thermostat which sets the temperature between 50° and 425°F. Heaters must be positioned below the level of liquid in the drum to avoid damaging the heater. Models ending with -115 run on 115V volt power and have a 6' cord and plug, while models ending with -230 run on 230V power and have a 6' cord without a plug. Morse 710 Drum Heaters must not be used for drums containing flammable materials or in explosion hazard areas.
Morse 710 Metal Drum Heaters have an estimated lead time to leave the warehouse of 10 to 15 business days.
Specifications:
- Heats the contents of 55, 30 or 15-gallon metal drums (see below)
- 115V or 230V heater available
- Thermostat set-point adjusts from 50 to 425ºF
- Heater width: 4"
- Watts: 700, 1000 or 1500 (depending on model)
- Made of fiberglass-reinforced silicone rubber
